gemot encubed  

Go Back   gemot encubed > Gemot > Technical Issues

Technical Issues For bug reports, problem solving, and help running Japanese software.

Reply
 
Thread Tools Display Modes
  #1  
Old 2007-06-20, 12:46
Andrico Andrico is offline
Visitor
 
Join Date: Jun 2007
Posts: 7
Default Linux Installation HELP?

Linux newbie here, recently upgraded from M$ Windows XP, and I have no clue how to run this terminal. So far all I've figured out on my own is [su]. Would someone give be the code that I have to run to install the files for Linux? I have what I want downloaded, and I know that it's a .tar.bz2 file, but I don't know whether I should configure it or what. help? Thanks in advance.
Reply With Quote
  #2  
Old 2007-06-20, 17:30
Roto
Guest
 
Posts: n/a
Default

Which game are you trying to run?

The games available for download from VisualNews that are marked as x86 linux each have a precompiled version of onscripter. So, you'll want to extract the archive, put it where you want, and then run the "onscripter" program that was in the archive. For example, say you downloaded Adagio. You would do the following:

tar xjf 'AdagioSetup[insani][AT2006].tar.bz2'
cd Adagio
./onscripter

which would start running the game.
Reply With Quote
  #3  
Old 2007-06-21, 12:30
Andrico Andrico is offline
Visitor
 
Join Date: Jun 2007
Posts: 7
Default

I'm planning on installing basically every game that is offered for Linux, but also want to know how to install Second Life :-)

Ok, here are the error codes I get:

tar: AdagioSetup[insani][AT2006].tar.bz2: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
[root@localhost ~]# cd Adagio
-bash: cd: Adagio: No such file or directory

And then, with Instant Deat! Panda Samurai, I can un-archive it I can't get any farther than that. I've tried this with root and non-root accessw, so I know it's not that.
Reply With Quote
  #4  
Old 2007-06-21, 14:25
Misu's Avatar
Misu Misu is offline
Addicted
 
Join Date: Oct 2004
Location: Bellevue, WA
Posts: 862
Send a message via AIM to Misu Send a message via MSN to Misu Send a message via Yahoo to Misu
Default

Well, are you sure your in the right directory?
Cause the error is telling you that in the directory you are in at the moment you ran tar xjf 'AdagioSetup[insani][AT2006].tar.bz2' is not where Adiago was downloaded to. You have to be in the same directory that you downloaded Adiago to to run just tar xjf 'filename.exe' without specifying the full path.

So, why dont you try running ls in the directory your in and see if there is a file called AdagioSetup[insani][AT2006].tar.bz2. If there is not, thats where the problem is and you have to navigate yourself to where you downloaded Adiago, then run the tar command there.

Hope that helps.

(And if you cant find the file, try redownloading it and watching where it goes..., and if you still can't find it, tell us what OS and browser you used to download it on and we can probably guess where the file should reside after a default download).

Oh, and just a little opinion thing..., if your a Linux newbie just moving from MS Windows XP and your not terribly familiar with shell environments, I would highly suggest starting yourself off with a Linux that has a nice graphical interface for it (GUI) preinstalled, so you can first get accustomed to how Linux works and its quirks before full jumping into shell to learn that. Theres a bunch of good free versions of Linux you can download out there with good GUIs (Ubuntu, SUSE, Fedora Core, PCLinuxOS, MEPIS, ect...).
__________________
VisualNews
Reply With Quote
  #5  
Old 2007-06-21, 15:24
Roto
Guest
 
Posts: n/a
Default

Also, another thing you can do (once you're in the correct directory) is to type 'tar xjf ' and then start typing the name of the file; then hit tab. If what you've typed so far uniquely identifies a file in the current directory, it will be autocompleted. Since it won't autocomplete if the file's not there, it can be a good indication to you that you're in the wrong place before you've bothered to type out a big, long filename. It also ensures that characters like the square brackets (which have special meaning to the shell) are properly escaped (i.e. prefixed with backslashes) when the autocompletion happens, so you don't have to put it in single quotes.

And, if some of the files you've downloaded are .tar.gz or .tgz files instead of .tar.bz2, use 'tar xzf' instead. (If you have a brand new distribution of Linux, you may be able to just do 'tar xf' for everything, but it's only the very latest version of tar that will detect the compression type properly.

And in case you don't know, 'cd directory' is the change directory command, and 'pwd' tells you where you happen to be at the moment. 'ls' lists the files in the current directory.

If you're using a Linux distro with a good GUI like Misu recommends, there should also be a graphical archive manager tool that you might want to look for. Double-clicking on the .tar.bz2 file might even bring it up automatically for you, but Linux distributions vary so it's hard to say for sure.

Last edited by Roto; 2007-06-21 at 15:28.
Reply With Quote
  #6  
Old 2007-06-21, 15:31
Misu's Avatar
Misu Misu is offline
Addicted
 
Join Date: Oct 2004
Location: Bellevue, WA
Posts: 862
Send a message via AIM to Misu Send a message via MSN to Misu Send a message via Yahoo to Misu
Default

Oh, and one last thing that confuses some windows porters, cd.. does not work in Linux to go down one directory as it is incorrect (MS Dos incorrectly interprets the statement). The proper way to write it is cd .. and Linux fully understands that as the command to go down one directory.
__________________
VisualNews
Reply With Quote
  #7  
Old 2007-06-21, 19:37
Andrico Andrico is offline
Visitor
 
Join Date: Jun 2007
Posts: 7
Default

lol, yeah, I'm using FC6, so the GUI is not the issue. So, I figured out was wrong with the last one, but now I get the problem:
ONScripter version 20050923a(2.54)
can't open any of 0.txt or 00.txt or nscript.dat or nscript.___
I get that with both Adaigo and A Winter's Tale.
What am I doing wrong? Or is there a problem with the OS or something.
Reply With Quote
  #8  
Old 2007-06-21, 20:07
Roto
Guest
 
Posts: n/a
Default

Hmm, that's odd. You're in the directory that contains either 0.txt or nscript.dat, right? (i.e. don't try to move just the onscripter binary to another directory by itself, and make sure that the directory with 0.txt or nscript.dat is the working directory.)

If that still doesn't work, try 'onscripter -r .'
Reply With Quote
  #9  
Old 2007-06-29, 14:19
Andrico Andrico is offline
Visitor
 
Join Date: Jun 2007
Posts: 7
Default

Oh dear.... still having problems... At least it's not as bad as the stuff I had with io back on Windows. Never got that figured out. Ok, so here's what I get:

[root@localhost ~]# cd '/home/andrico/Adagio/'
[root@localhost Adagio]# ./onscripter
ONScripter version 20060724-insani(2.55)
Floating point exception
[root@localhost Adagio]#

And then: Nothing. I also tried using the GUI to click on the onscripter file, and I still get nothing. So then I try and use a different one.

[root@localhost ~]$ cd '/home/andrico/a_winters_tale/'
[root@localhost a_winters_tale]$ ./onscripter
ONScripter version 20050923a(2.54)
can't open any of 0.txt or 00.txt or nscript.dat or nscript.___
[root@localhost a_winters_tale]$

This is the same as I used to get. So then I try and download a few new ones. I start with Night of Forget Me Nots. I unpack this one and I don't even need to use the terminal, I just click on the program after extraction and away it goes, so YAY! But I'm not done yet, because I am game deprived without Windows and with Wine being a piece, so I try Plain Song. On Plain Song, I can't even open the archive manager, which is a problem I only had before with .rar archives until I figured that out. So then, I got the command line output:

bzip2: Compressed file ends unexpectedly;
perhaps it is corrupted? *Possible* reason follows.
bzip2: Inappropriate ioctl for device
Input file = (stdin), output file = (stdout)

It is possible that the compressed file(s) have become corrupted.
You can use the -tvv option to test integrity of such files.

You can use the `bzip2recover' program to attempt to recover
data from undamaged sections of corrupted files.

/bin/gtar: Unexpected EOF in archive
/bin/gtar: Error is not recoverable: exiting now

I try Instant Death: Panda Samurai, which doesn't really matter as much to me cuz I beat it on Windows, and I got the exact same problem as Adaigo. So then I try Visions from the Other Side. Same problem as Adaigo. And then I try, Red Shift and A Winter's Tail, and I get the same problem as Plain Song. So right now, I've only been able to get one to work. Any advice? Cuz I really love Visual Novels, and the sooner I can do this, the sooner I can figure out how to get Casual Romance Club running.
Reply With Quote
  #10  
Old 2007-07-05, 18:15
Andrico Andrico is offline
Visitor
 
Join Date: Jun 2007
Posts: 7
Default

bump? Anyone? At All?
Reply With Quote
  #11  
Old 2007-07-05, 18:57
zalas zalas is offline
 
 
Join Date: Feb 2004
Location: fushigi misuterii
Posts: 1,831
Send a message via ICQ to zalas
Default

Do me a favor and run 'ls -lR' inside ~/Adagio
__________________
~Yoda is waiting in the air~ | HAVEN
Reply With Quote
  #12  
Old 2007-07-09, 01:11